How do I fix my HP boot device not found 3F0?

How do I fix my HP boot device not found 3F0?

Restoring the BIOS Default Settings

1. Turn off the computer and wait five seconds.
2. Press the power button to start the computer and repeatedly press the f10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press f9 to select and load the BIOS Setup Default settings.
4. Press f10 to Save and Exit.

How do I fix error 3F0?

Methods to Fix Boot Device Not Found 3F0 Error

1. Method 1: Change the Boot Order.
2. Method 2: Perform Hard Reset.
3. Method 3: Restore BIOS to Default Settings.
4. Method 4: Fix and Rebuild Damaged MBR.
5. Method 5: Reconnect your Hard Drive.

How do I get to the boot menu on a Compaq cq58?

1. Please, shutdown the computer using the power button.
2. Power it on. 2.1 As soon as you press the power-on button, immediately begin hitting the Esc button (like tap-tap-tap). This should open a HP Startup Menu.
3. Choose F9 to open Boot Device Options.
4. Select your USB drive and it should begin loading.

How do I boot my Compaq cq58 from USB?

Turn on the computer and immediately press the Escape key repeatedly, about once every second, until the Startup Menu opens. Press F9 to open the Boot Device Options menu. Use the up or down arrow key to select the USB drive, and then press Enter.

How do I fix Windows 7 boot device not found?

Table of Contents

1. Fix 1. Check boot order and reset BIOS settings to default.
2. Fix 2. Perform a hard reset.
3. Fix 3. Run Startup Repair with Windows installation disc.
4. Fix 4. Run Bootrec commands with Windows installation disc.
5. Fix 5. Fix damaged MBR without Windows installation disc. Conclusion.

What Causes hard disk 3F0?

Usually hard disk 3F0 error can be caused by following reasons: Wrong boot order in BIOS. Hard disk connection problem. Outdated or misconfigured BIOS.

How do I factory reset my Compaq Presario cq58?

1. Reboot, and repeatedly press F10 at the HP logo until the recovery screen appears. 2. When the recovery screen appears, press “Next” and then “Yes” to perform a non-destructive recovery (all data saved).

What is hard disk 3F0 error?

But in a nutshell, what it means is that your computer can’t talk to your hard drive. This is the part of your computer that contains your operating system, all of your apps and programs, and your files. So without it, your computer is just a giant brick. A Hard Disk 3F0 error is a common boot error seen on HP models.