How do you program a Ritetemp thermostat?
RiteTemp Thermostat Programming To run the preprogrammed Energy-Star approved program, select “Heat” or “Cool” with the mode switch. To create a custom program, press the “Program” button. Press the “Day” button to select the day you want to program. Press the “Next” button to select the time slot you want to program.
Why is my Ritetemp thermostat not working?
Check the batteries if the heat or cool was previously working and stops working. Replace with brand new batteries if needed. Reset the thermostat. Check the wires for any breaks or damage.
How do you troubleshoot a Ritetemp thermostat?
Please take the batteries out of the unit and remove the C wire if available for 15 minutes. Then put a new set of alkaline batteries back into the unit and re‐install the C wire if available, next reset the thermostat and try it again.
How do I reset my old Ritetemp thermostat?
Similarly, you may ask, how do I reset my RiteTemp thermostat? Then insert the batteries and then turning on the thermostat and there you go. Your device is now reset. But for Ritetemp thermostat, you have a reset button that does this task for you without asking you to turn off the device and removing the batteries.
How do I turn off the hold on my thermostat?
- Press + or – to adjust the temperature.
- TEMPORARY HOLD is displayed and the setpoint temperature flashes. While it’s flashing, press Hold (Mode) button to change to Permanent Hold.
- To cancel the Permanent Hold, press + or – and then press Cancel.
Is Ritetemp thermostat still in business?
While Ritetemp Thermostats have since been discontinued, models are still available on Amazon or Ebay and we hope this article provides information on the benefits and drawbacks of a Ritetemp Thermostat, and how they work.
How do you turn on the AC Ritetemp thermostat?
To start Ritetemp thermostat programming for models like the 6022, you’ll want to find the heat/cool adjustment and move the switch to “heat” and then press the “program” button. An abbreviation for the day of the week will appear, so you’ll need to press the “day” button to adjust to whatever day it is.