What is the red wire for when connecting a ceiling fan?
A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.
Where does the red wire go on a ceiling fan with remote?
Connect the red wire from the ceiling to the black wire in the fan. Cap off the black and white wire from the output side of the remote receiver module….
- So the white wire on the receiver is capped?
- @user38908 The blue (or black depending on how you want it) coming out if the remote module would be capped.
What do I do with the red wire when installing a ceiling light?
How to Connect the Red Wire for a Ceiling Light Fixture. The red wire is most likely a spare wire that was intended to be used when wiring for a ceiling fan. Typically when a ceiling fan is installed the red wire is most commonly used for the light and the black is commonly for the fan motor.
What do you do with the red wire?
The exact purpose of a red wire for a light fixture can vary. Except in rare cases, it is a hot wire or a switched hot wire. Check the wire with a non-contact voltage tester with the power and switch turned on. If the tester indicates the wire is hot, turn the switch off and retest.
What color wires go together on a ceiling fan?
Black wire is for the fan. Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground.
Does red wire go with white or black?
Sheathed cable with a red wire always is accompanied by a black wire, a white wire and a bare wire. Very old homes may have cable that excludes the bare wire.
Where do you connect the red wire?
Normally you’ll see a red wire in places you would expect a ceiling fan. But in places like a bathroom or a wall light, if you see a red wire, it’s a good bet that the red wire is the wire that’s connected to the light switch.
Does red wire go with black or white?
Is a red wire the same as a black wire?
Black wires are hot wires that run to the electrical outlet from the switch. Red wires are hot wires common in a 240-volt outlet or when a wall switch controls the outlet. Blue and yellow wires are hot wires for ceiling fans and three- or four-way switches. White or gray electrical wires are neutral wires.
What do you do with the red wire when replacing a fan with a light?
So all you need to change is to disconnect the black wires of the light fixture from the other black wires, and connect them to the red wire from the switch. Leave everything else connected as is, and it should work for you. First off you need to check what was connected at the switch.