What is the specific gravity 0f diesel oil?
0.82 – 0.95
Specific Gravity Resource
Liquid | SG @ 60°F / 15.6°C |
---|---|
Diesel Fuel Oils 20 | 0.82 – 0.95 |
Ethylene Glycol | 1.125 |
Gasoline | 0.68 – 0.74 |
Kerosene | 0.78 – 0.82 |
What is the density of diesel oil?
about 0.9 g/cm3
Diesel oil, often referred to as Marine Diesel Oil (MDO) or Marine Diesel Fuel (MDF), has a specific density of about 0.9 g/cm3; the flash point is above 600C. The calorific value is about 44000 kJ/kg; the kinematic viscosity is about 8 to 11 cSt at 400C, and the sulphur content is about 2%.
What is the specific weight of diesel?
2.3. The density of petroleum diesel is about 0.85 kg/l – about 15–20% higher than the density of gasoline, which has a density of approximately 0.70–0.75 kg/l.
What is the specific gravity of fuel?
Gasoline weighs less than water, and most blends have a specific gravity somewhere between 0.7 and 0.8.
What is the specific weight of oil?
Specific Gravity for Oil. g=141.5131.5+DegreesA. P.
How do you calculate specific gravity of fuel oil?
Using the API to Specific Gravity Conversion formula, the oil specific gravity is calculated: SG(oil) = 141.5 / (°API+131.5) = 141.5 / (35+131.5) = 0.845….Example:
- Oil Gravity: 35 API,
- Water Cut: 90%,
- Water Gravity: 1,01 rel-H2O,
How is diesel density calculated?
For example, if you poured 16 ml of fluid in the cylinder, you will use 16 ml. If the total weight of the fluid is 16 grams, the calculation would be 16 g / 16 ml. This would give you a density of 1 g/ml.
What is the viscosity of diesel oil?
2 diesel fuel has a viscosity in the range of 2.5–3.2 cSt at 40°C, and biodiesel consisting of the methyl esters of soybean oil has a viscosity between 4.2 and 4.6 cSt (1,3–6).
How do you calculate specific gravity of oil?
Why specific gravity of oil is important?
In applications with higher specific gravity, more torque would be required to produce the desired result. If specific gravity was not taken into consideration, and a mixer not optimized accordingly, results would be unpredictable, and motor damage and/or failure would likely occur.
What is flash point of diesel HSD?
Flash Point: > 35 °C and > 66°C for HF HSD.
What is the specific gravity of diesel fuel?
The API gravity at 60°F (15.6°C) for No. 2 diesel fuel is between 30 and 42. The specific gravity, at 60/60°F, and the density, at 15.6°C, are between 0.88 and 0.82. Below table shows specification provided by Indian Oil.
What is the density of heavy fuel oil?
Other Information Property Units Diesel Oil (Gas Oil) Light Fuel Oil (LFO) Heavy Fuel Oil (HFO) Density @ 15C kg/l 0.84 0.96 1 Specific Gravity 0.84 0.93 0.97 Combustion : Air Requirements per kg of kg of dry air kg 14.8 13.88 13.68
What are the units of composition of diesel oil?
Other Information Property Units Diesel Oil (Gas Oil) Light Fuel Oil (LFO) Medium Fuel Oil (MFO) Composition: Carbon %C 85.7 85.5 85.3 Hydrogen %H 13.4 11.5 11.2 Sulphur %S 0.9 3 3.5
How do you calculate the volume of diesel fuel?
About diesel fuel. diesel fuel weigh(s) 0.83 gram per (cubic centimeter) or 0.48 ounce per (cubic inch) at 24.44°C or 76°F. Volume to weight, weight to volume and cost conversions for Diesel fuel with temperature in the range of 10°C (50°F) to 140°C (284°F) Formulas: volume. v = w ⁄ ρ. weight.
https://www.youtube.com/watch?v=AnfCku2scps