Live truth instead of professing it

How do you reset a fuser counter?

How do you reset a fuser counter?

Reset the Fuser Counter:

  1. Log in as a System Administrator. See the Related Content for additional information.
  2. Press the Machine Status button on the Control Panel.
  3. Select the Tools tab on the Touch Screen.
  4. Select Troubleshooting.
  5. Select Resets.
  6. Select Supply Counter Reset.
  7. Select Fuser.
  8. Selection Confirm.

How do I reset my Brother printer parts?

FAQs & Troubleshooting

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

How do you reset the fuser on a Brother HL l6200dw?

Open the front cover Press and hold OK for about two seconds to display the [Drum Unit] option, and then press arrows to choose part OK. Press UP ARROW for [Reset] to reset the fuser counter. Press the [Go] and [+] buttons in ready mode. “Drum Unit” is displayed on the LCD.

How long does a brother fuser last?

The fuser is a part of laser printers that bonds the toner and paper together using heat and pressure. Fusers need to be replaced every 75,000 – 300,000 pages depending on the printer model.

How do I factory reset my Xerox printer?

Reset the Printer Settings to Factory Defaults

  1. At the printer control panel, log in as administrator, then press the Home button.
  2. Touch Device > Resets > Reset to Factory Defaults.
  3. At the prompt, touch Reset.
  4. When the process is complete, the printer restarts automatically.

What is a fuser error on a Brother printer?

The message ‘Fuser Error’ or ‘Self-Diagnostic’ indicates the fuser unit is too hot, too cold, or is not heating up fast enough. It is a mechanical malfunction of the Brother machine and the machine will need to be reset.

How do you reset the laser on a Brother printer?

  1. Step 1: Make sure the printer is at the main screen.
  2. Step 2: Open the hidden reset menu by simultaneously press and hold the 3 and 9 keys on the numerical touchpad.
  3. Step 3: Select “Laser Unit” from the Reset Menu.
  4. Step 4: Tap “Yes” to reset the Laser Unit:
  5. Step 4: You will then see the following screen:

How do I know if my printer fuser is bad?

Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.