How much HP does a cammed 6.0 LS have?
Run with Hooker headers and a 92mm cable-driven throttle body, the LS3-headed 6.0L produced peak numbers of 443 hp at 5,400 rpm and 467 lb-ft of torque at 4,500 rpm.
Do you have to degree the cam in an LS motor?
This applies to virtually all the LS series of engines. And if you’re going to the effort of bolting in a camshaft, you might as well degree it to ensure it will be timed properly. If you’ve never degreed a camshaft, now is a great time to learn.
How much HP can a stock 6.0 LS handle?
If we were to run the 6.0L in stock trim, the resulting power output would be around 400 hp (on this dyno the way we test). If we apply 14.5 psi from our turbos to the stock 400hp engine, we might get 800 hp.
How much horsepower will a Stage 3 cam add?
Stage 3 will have up to 40% more power compared to the stock setup, but to get there, you’ll have to complete the Stage 1 & 2 modifications, and mild big bore of the engine.
Is Degreeing a cam necessary?
Pit Stop with Marlan Davis: Degreeing a custom cam ensures its maximum performance, helps prevent piston-to-valve contact, and protects against assembly error. The bigger the cam, the more important this is.
What kind of Cam does lsxceleration use?
LSXceleration ASA Cam 226/236 .525/.525 HR110+3 Our version of the GM # 88958770 ASA cam. Great cam for mid-range power, choppy idle. This is a 3-bolt cam core. *Note: Recommended valve spring is 85033-16. LSXceleration Stage 4 MLx Cam 238/242 .595/.595 HR112+4 Requires 3-bolt cam sprocket.
What does a new camshaft kit include?
The kit comes complete with new, assembled heads. The heads boast a ton of changes from the stock versions to provide extra strength and power. The kit also comes with a new camshaft featuring an advertised 291/295 duration, .595/.595 lift and 112 degrees of lobe separation.
How long is a LST camshaft?
COMP Cams Gen V LT LST Camshaft 224-300-13 Duration @ .050″ 227/238 | Valve Lift w/ 1.7 0.650″/0.639″ | HR116.5+4 COMP Cams LST (Low Shock Technology) Camshaft Packages for GM LS applications take the guesswork out of choosing the right valve train…
What are the specs of a stage 4 Pro LS Cam?
Stage 4 Pro LS Cam 238/246 113+3, .625/.605 Lift, Maximum power version, 3-bolt 5.3, 5.7, 6.0, 6.2, 7.0, LS1 LS2 LS6 LS3 LS7 LSA LQ4 LQ9 LS9 LY6 LY5 Camshaft, BTR, Truck Norris Cam, 212 int./212 exh.