How thick should a pave band be?

In fact, a band between 3 and 4mm will give you the most flexibility in terms of stone size and shape. It’s not too small and not too big, so it can support a wide range of diamonds and styles.

Is a 1.2 mm ring band too thin?

There’s always someone. Look, when it comes to putting a limit on thin, we recommend not going below 1.5mm in width, but we will go as thin as 1.35m depending on the ring, stone size, and band height. This comes down to structure, really. Any thinner than that and your ring just won’t hold up to regular wear.

Is 2mm too thin for wedding band?

2mm: Narrow, perfect if you want a thin band to sit against an engagement ring or just a more delicate band. 3mm (Spaghetti) : “Classic feminine width” fits nicely next to an engagement ring, but is also weighty enough to be worn on its own. 4mm: For anyone who wants a midrange band.

How many carats is a pave band?

0.01 to 0.02 carats
Pavé settings and petite pavé settings often hold diamonds that are around 0.01 to 0.02 carats, while micro pavé settings are designed to hold even smaller diamonds.

Is 1mm ring too thin?

For rings without stones on the band, the thinnest recommendation would be 1mm but ideally, 1.2mm if possible for added strength. In the end, the width of your band is ultimately up to your preference.

Is 1.5 mm band too thin?

An engagement ring with a band (or shank) of at least 1.6mm-2.0mm provides a stable foundation for a center stone. Shanks thinner than 1.6mm may not hold up in the long-run. That’s why we recommend going no smaller than a 1.5mm band. If the band is too thin, it’s likely to crack or bend over time.

Is 1 mm too thin for ring?

Don’t go too thin An engagement ring with a band (or shank) of at least 1.6mm-2.0mm provides a stable foundation for a center stone. Shanks thinner than 1.6mm may not hold up in the long-run. That’s why we recommend going no smaller than a 1.5mm band. If the band is too thin, it’s likely to crack or bend over time.

Is a 1mm band too thin?

Is a 1mm wedding band too thin?

Is a 1.5 mm band too thin?