Live truth instead of professing it

Is a 160 temperature range?

Is a 160 temperature range?

Temperature testing consists of non-operational ground survival temperatures as low as -55 C and operational high temperatures of 70 C. Altitude testing as high as 70,000 feet as well as decompression (emergency descent) and overpressure testing (routine aircraft pressurization system testing) is also required.

What does do in do-160 stand for?

Environmental Conditions and Test Procedures for Airborne Equipment
DO-160, Environmental Conditions and Test Procedures for Airborne Equipment, published by RTCA (Radio Technical Commission for Aeronautics), is the international standard that defines environmental test conditions and applicable test procedures and criteria for avionic equipment to determine their performance …

What is Mil Spec compliant?

In the United States, military standards, or defense standards, are enforced by the U.S. Department of Defense and maintained by the Air Force, Army, and Navy. If a product is MIL-STD-certified or MIL-STD-compliant, that product is compliant with certain requirements and standardization objectives set forth by the DoD.

What is 160 or MIL-STD-810G?

DO-160 contains 26 test methods, while the MIL-STD-810 covers 28. A notable difference between the battery of tests of each document is relevant to military equipment tests that only exist in MIL-STD- 810. They are: gunfire tests and acoustic noise tests.

Does 160G Do Section 4?

RTCA/DO-160G Section 4.0 Testing Summary: This section of the standard covers temperature testing and altitude testing or equipment intended to be installed on aircraft. The altitude testing includes altitude testing, decompression testing and overpressure testing. The altitude testing peaks at 70,00 feet.

Does 160 have magnetic effect?

The RTCA DO-160 magnetic effects test standard determines the magnetic effect of aircraft equipment. RTCA/DO-160G testing is mainly intended for finding or proving the closest distance to compasses or compass sensors (flux gates) at which that unit is allowed to be installed.

Does 160 sand and dust test?

The RTCA DO-160 sand and dust test standard determines the resistance of the equipment to the effects of blowing sand and dust. The test involves the sand and dust being carried by air movement at moderate speeds. Sand and dust test labs investigate the effect these contaminants can have.

What is the difference between MIL STD 810F and MIL-STD-810G?

Some products will carry a MIL-STD 810E rating and some may state they are MIL-STD 810F compliant. The Latest MIL-STD-810G is a revision of MIL-STD 810F and 810E. The tests and methods are basically the same but much of the standard has been rewritten to provide clearer direction.

Is MIL-STD-810G waterproof?

This means it can withstand water protected by a nozzle (6.3mm) against enclosure from any direction. Only rugged laptops with a IPx7 or IPx8 rating can be submerged in water up to 1 meter.

Does 160G do Section 8?

RTCA DO-160 Section 8 – Vibration The purpose of DO-160 vibration testing, which involves a series of tests, is to demonstrate that airborne equipment complies with performance standards and durability requirements when subjected to installation-specific vibration levels.