What is IC 74LS00?
The 74LS00 is a 14 Pin Quad 2-Input NAND Gate IC. This device contains four independent gates each of which performs the logic NAND function. NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds with the low power consumption of standard CMOS integrated circuits.
What logic gates is equal to IC 74LS00?
The 74xxyy ICs are logic gates of digital electronics. 74LS00 IC has four NAND gates. Also each gate has two inputs. Hence name QUAD TWO INPUT NAND GATE….74LS00 Pin Configuration.
| Pin Number | Description |
|---|---|
| 10 | B3-INPUT2 of GATE 3 |
| 8 | Y3-OUTPUT of GATE3 |
| NAND GATE 4 | |
| 12 | A4-INPUT1 of GATE 4 |
How many pins does IC 7400 have?
14-pin
The IC 7400 is a 14-pin chip and it includes four 2-input NAND gates. Every gate utilizes 2-input pins & 1-output pin, by the remaining 2-pins being power & ground.
How many pins does the 74LS00 IC have?
74LS00 is NAND gates-based IC. It has 14 pins which all connected with 4 NAND gates….74LS00 NAND Gate PIN CONFIGURATION.
| PINS | DETA | |
|---|---|---|
| Y1 | Pin 3 | The output of the first NAND gate will be available at Pin 3. |
What is the difference between 74s00 and 74LS00?
The 74LS00 family improves technically on the 7400 family in two key areas: faster speed and lower power consumption. The only limitation of the 74LS00 family compared to the 7400 family is that the 74LS00 family can only source half as much current.
What is the maximum current that a 74LS00 NAND gate can sink?
The major difference appears to be the current capacity of the outputs; the 74LS00 sources up to 0.4 mA when high and sinks up to 8 mA when low; the 74LS37 sources up to 1.2 mA when high (3x) and sinks up to 48 mA (6x) when low.
How many pins are in AND gate?
Typically, standard logic gates are available in 14 pin or 16 pin DIL (dual in line) chips.
What is connected at pin number 14 and pin number 7 of any logic gate IC?
The power supply required is +5V. For most of the 7400 chips, pin 7 is the ground (GND) connection and pin 14 is the +5V power supply.
Which pin in IC 7400 is ground pin?
The IC 7400 consist of four NAND Gates. The NAND Gate is also called Universal Gate….Pin Description of IC 7400:
| Pins | Description |
|---|---|
| Pin 7 | Ground Pin which used to provide the power supply to the IC. |
| Pin 8 | It is connected to the Output(Y) of NAND Gate 3 |
Which IC is a quad 2 input NAND gate?
IC 74HC00 QUAD
IC 74HC00 QUAD 2-INPUT NAND GATE.
How many pins are there in a cd4027?
All inputs of CD4027 are protected against static discharge by diodes which are clamped to VDD and VSS. It is available in a variety of 14-pin packages which includes PDIP, GDIP, PDSO. Where to use it? How to use CD4027? CD4027 dual JK flip-flop comes with 16 pins. The picture depicts a pinout diagram. This CD4027 IC has a total of 16 pins.
How many pins are there in the IC 74LS00?
It has 14 pins which all connected with 4 NAND gates. Due to the NAND gate known as universal gate, 74LS00 can be converted into OR and NOT gate easily. The IC comes in three packages, SOIC, PDIP, and SOP.
What is the maximum input voltage of the cd4027?
The CD4027 is a CMOS based high voltage high speed Dual JK Flip-Flop package. The Flip-Flop could typically operate at a speed of 16MHz even at high voltages like 15V with a low noise margin of only 2.5V. Maximum Low Level Input Voltage: 0.8 V
What is cd4027 flip-flop?
The CD4027 IC is a dual J-K Master/Slave flip-flop IC. This IC contains two JK flip flops having complementary outputs such as Q and ~Q. Each JK flip flop has control and input pins such as reset, set, clock and JK inputs.