Live truth instead of professing it

Why is my stealth camera not working?

Why is my stealth camera not working?

Clear cache and data: You can typically clear cache/data via your device’s settings menu. This step removes temporary files to help free up needed space. Uninstall/reinstall Stealth Cam Command app: On select devices, you can uninstall and reinstall the Stealth Cam Command app to help alleviate any issues.

How do I connect my stealth camera to my phone?

Sign into the Stealth Cam Remote App. Select “ADD a new FLX Camera” on the menu screen. Follow the instructions in the App. You may need to start the Wireless Setup in Wireless Settings on the camera.

Why is my stealth cam not uploading pictures?

Make sure the camera has a good signal. Use the Signal Strength feature in the Cellular Settings. The percentage should be higher than 20% to reliably receive photos.

How do I update my stealth CAM software?

Press MENU to enter the menu selection. Press the Up Arrow twice to select the SW UPGRADE menu item. Press the ENTER button then the UP button to change the selection to YES. Press the ENTER button to start the upgrade process.

How do I know if my Stealth Cam is working?

To check the status of your camera, press the “Sync” button below the camera’s battery tray. Refer to battery tray sticker for information on LED codes. If you receive a red LED on network or account, contact customer support at 1.888.

How do I test my Stealth Cam?

By using the test mode. A light on the front of the camera labeled TEST will blink when the camera is detecting motion. Directly face the camera towards the location you are trying to cover and walk in front of it to see the light go on, this will indicate activity.

What app does Stealth Cam use?

Available on Fusion-X, Reactor and DS4K Transmit cameras. For the video-enabled cameras, the Command Pro app shows a 3-frame preview of the recorded video, before you choose to download the full clip. Turn black and white images into color on-demand with Command Pro’s groundbreaking AI-powered technology.

How do I connect my stealth camera to my network?

Blank SIM card, go to….Add your camera to the Plan by following these steps:

  1. Navigate to the MY SERVICES and EQUIPMENT section.
  2. Click on the “+” sign next to your plan.
  3. Enter the ICCID of the SIM card and IMEI of the camera.
  4. Once the ICCID and IMEI fields are populated click ACTIVATE.

How long does it take a stealth cam to update?

It takes about 2-‐3 minutes to upgrade.

Why is my trail Cam not working?

Most of the time, if your trail camera is not taking pictures, the problem will fall into one of three categories: an issue with the SD card, an issue with the battery, or an issue with camera placement or settings.

Why did my trail camera stop working?

The cause of this may be a firmware issue or bad sectors on the SD card. Reformatting the card and a fresh install of the latest camera firmware will usually solve this problem. If you’re using an Apple computer and having problems playing back video files, it may be down to the file format.